When you think of plumbing, do you just see it as a hidden and mysterious network of pipes and pumps that makes your toilets and sinks work? If so, then you are very unlikely to have a go at mauntaining or repairing the system. Plumbing is not actually that complicated, and there are many things that you can do yourself to maintain and repair your system. Read on to find out how.
If your pipes are prone to freezing, let the water trickle continuously in at least one faucet during weather that is below freezing. This will minimize the chances that the pipes will freeze and leave you without water. If water is continually running through the pipes and trickling out of a faucet, the pipes are less likely to freeze.
If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.
Be sure to check your dryer and clear your lint trap of any debris. By keeping it clean, you can prevent fires and other problems. Make sure that you inspect the lint trap for any holes or tears that might mean lint is going to your pipes, which might lead to clogs and other problems to deal with.
To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.
Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.
Do not place items in the toilets that do not belong there. For example, if you are a female, do not throw away sanitary pads or tampons in your toilet. This could cause severe damage to your toilet that could require a plumber, or even worse, a whole new toilet!
In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. https://www.realhomes.com/advice/radiators-cold-at-the-bottom is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.
Protect you plumbing pipes! If you live in an area which has cold winters and are leaving your home for an extended amount of time, protect your plumbing while you are gone! Shut off the main water valve! Drain the system of water by opening the faucets at the highest and lowest points of the house. Also, make sure that you have left some heat on in the house! Set the thermostat to at least 55 degrees Fahrenheit.
If you need a plumber, be certain to do some research first. Some plumbers do not have the experience to deal with certain problems, and may make matters worse. Check the reviews on any plumber you are considering, and ask friends and family for the name of a plumber that they use and trust.
To prevent pipe banging when you turn on the water, think about rubber blankets or straps. Instead of assuming the pipes need replaced, consider anchoring them or buffering them. If your pipes are plastic, leave them some room for expansion and contraction. If pipes do not leak but just make noise, eliminate the noise.
Check for leaks behind the wall tile in your bathroom, especially any tile surrounding your bathtub, by gently pressing each tile and feeling for some give. If you find any mushy or soft spots, you will need to find the source of the leak and repair it to prevent further damage.
Avoid flushing cotton balls, cotton swabs and any feminine sanitary products down the toilet. Even small panty liners can cause big problems because their adhesive backing can stick to pipes and cause stoppages. Keep a small, covered wastebasket next to the toilet to encourage guests to properly dispose of used sanitary articles.
Watch out for decreased levels of intensity in the water flow in your bathroom. This can be a sign of calcium or mineral deposits disrupting water flow. If spotted early enough it may be possible to remedy this without having to replace the pipes.
Check for leaks behind the wall tile in your bathroom, especially any tile surrounding your bathtub, by gently pressing each tile and feeling for some give. If you find any mushy or soft spots, you will need to find the source of the leak and repair it to prevent further damage.
Having to wiggle the toilet handle or hold it down to get your toilet to fully flush indicates that the tank parts need to be replaced. Kits that include all of the parts needed can be purchased in any hardware or home improvement store to easily do the repair yourself.
Make sure to use the toilet for waste and toilet paper only. Don't put cotton swabs and other items in the toilet as if it is a trashcan. Make sure that whatever you put in the toilet can easily dissolve, so that you don't cause major clogging and backup in your pipes and drains.
If your lawn has areas where the grass grows very quickly compared to the rest, seems constantly wet or has a noxious odor you may have a sewer line leak. https://mgyb.co/s/INQwN or crack in sewage pipes can be repaired if caught early and save thousands of dollars in failed septic inspection expenses.
When you are working on any kind of plumbing project, you always need a backup person. This is because, when working with water, you never know when an emergency can happen and that second pair of hands can come in very useful! This can even be an unskilled person who can follow directions.
As you can see, plumbing is not rocket science. All you need to do is to find reliable sources that will give you great tips on addressing plumbing problems. The time you invest in educating yourself on plumbing issues will be time well-spent, because it will save you a lot of money in the long run.
0 
Star